Gigabit POE Switch
Model:PS3062F
Features
- Rugged Industrial 4 port Gigabit POE Injector
- Super Voltage Booster -- 12V/24V/48VDC Power input
- 4x10/100/1000M TX PSE (802.3af/at POE+)
- 2x100/1000M SFP, Boost Voltage from 12/24/48VDC to 55VDC
- Voltage input range 12-56VDC
- Operating temp: -40°C to +75°C
Discontinued date
- 2020.11.27
Alternative models
- Indoor type 8port PS3089 / Vehile type M12 PS3064DM
Description
This Super Voltage Booster --- The high power 4 port industrial POE+ Injector is equipped with our high efficiency ColdDesign technology which allows low input voltage, such as 12/24/48VDC be boost up to 55VDC to meet IEEE802.3at requirement. The ColdDesign technology will not only boost up Input Voltage, also reduce the excessive heat problem to a minimum. It accepts the input voltage as low as 12VDC, to be boost up to 55VDC. And it is also equipped with 2 port SFP fiber that can be used as fiber redundancy, cascaded to your other devices to expand your network application. It is being rigorously tested for your Security, Transportation and Telco application.
Specifications

Model | PS3062F |
Protocols | CSMA/CD |
IEEE Standard | IEEE 802.3 10Base-T Ethernet / IEEE 802.3z 1000Base-X Gigabit Ethernet |
IEEE Standard | IEEE 802.3u 100Base-TX Fast Ethernet / IEEE802.3x Flow Control and Back Pressure |
IEEE Standard | IEEE 802.3ab 1000Base-T Gigabit Ethernet / IEEE802.3af for POE/ IEEE802.3at for POE+ |
MAC address table size | 1K |
Network connector | 4xRJ-45 10/100/1000BaseT(X) auto negotiation, 4 Giga POE+ 802.3at/af PSE port |
Network connector | Auto MDI/MDI-X function, Full/Half duplex, 2 x SFP 100/1000M BaseX |
Housing design | Rugged Metal, IP30 Protection |
Power Consumption | 5.76W@12/24/48 VDC full load, Without POE |
Network Cable | UTP/STP above Cat.5e Cable / EIA/TIA-568 10-ohm (100m) |
Network Cable | Fiber Cable (Multi-mode):50/125um,62.5/125um / Fiber Cable (Single-mode): 9/125um |
Switch Architecture | Back-plane (Switching Fabric): 12Gbps |
Packet Buffer Size | 1M |
Data Processing | Store and Forward |
LEDs | PW1(Power 1) Green, PW2(Power 2) Green, ERR( Fault ) Amber, |
LEDs | TX/RJ-45 port: LNK (Link/Active) Green, SPD(Speed) 10/100(OFF ) ,1000 (Green) |
LEDs | SFP Fiber Per port: Link (Green), Active Flash |
POE power | POE power per port 30watts. Maximum 36Watts per port at 12/24/48VDC input |
POE power | Maximum total power 126Watts at 24VDC and 48VDC power input |
POE power | Maximum total power 65W at 12VDC power input |
Reserve polarity protection & Overload current protection | Present |
Removable terminal block | Provide 2 Redundant power, Alarm relay contact, 6 Pin |
Removable terminal block | Solid wire (AWG):12-24/14-22 |
Removable terminal block | Wire range: 0.34mm^2 to 2.5mm^2 |
Removable terminal block | Stranded wire(AWG): 12-24/14-22 |
Removable terminal block | Torque:5lb-In/0.5Nm/0.56Nm |
Removable terminal block | Wire Strip length: 7-8mm |
MTBF (mean time between failure) | 510,304 hrs ( MIL-HDBK-217F) at 25°C |
EN55022/24 (Certifications) | ITE equipment |
EN55011 (Certifications) | Industrial, Scientific and Medical (ISM) equipment |
Safety (Certifications) | IEC EN60950-1 |
EMC/EMS (Certifications) | CE, FCC, VCCI |
(Certifications) EMI | FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
EN 50155 / EN 60068-2-6 (Certifications) | Vibration |
EN 50155 /EN 60068-2-27 (Certifications) | Shock |
EN 50155 / EN 60068-2-32 (Certifications) | Free Fall |
EN50121-3-2 (Certifications) | Railway Applications – Electromagnetic Compatibility – Part 3-2 Rolling Stock - Apparatus |
EN50121-4 (Certifications) | Railway Applications – Electromagnetic Compatibility – Part4 Emissions and Immunity of the Signaling and Telecommunications Apparatus |
EN50155 (Certifications) | Railways Applications Electronic Equipment used on Rolling Stock |
Alarm Relay Contact | Relay outputs with current carrying capacity of 1 A @24VDC, Relay in short circuit mode when 2 powers are connected. in open circuit mode when only one power supply is connected |
Installation | DIN Rail mounting and Wall Mounting |
Flow Control | IEEE 802.3x Flow Control and Back Pressure |
Jumbo Frame | 9KB |
DIP switch | DIP 1: OFF: Port 5 SFP ON (DEFAULT); ON: Port 5 SFP OFF |
DIP switch | DIP 2: OFF: SFP 1000M (DEFAULT); ON: SFP 100M |
Operating humidity | 5% to 95% (Non-condensing) |
Operating temperature | -40℃〜75℃ fully tested |
Storage temperature | -40℃〜85℃ |
Dimensions | 142mmx43mmx105mm |
Power Supply | Redundant Dual DC 12V-56V Power Input |
Downloads

Classification | Description | Date | File Size | Downloads |
Image | High-Resolution Image | 2023-05-30 | 901KB | |
Catalogue | Catalogue-PS3062F | 2016-12-07 | 515KB |
Accessories

-
BTE08W
Launched
-
BTR09W
Launched
-
BTR10W
Launched
-
BCD01S
Launched
-
BCR02W
Launched
-
BCR03W
Launched
-
BCR04W
Launched
-
BCR05W
Launched
-
BCR05W-V1
Launched
-
BCR06W
Launched
-
BCR06W-V1
Launched
-
BTD01W
Launched
-
BTD02W
Launched
-
BTD04W
Launched
-
BTD04W-V1
Launched
-
BTE02S
Launched
-
BTE07K
Launched
-
BTR03S
Launched
-
BTR06S
Launched
-
BTR07W
Launched
-
BTR08W
Launched
-
BTR08W-V1
Launched
-
BTS02S
Launched
-
BTS03W
Launched
-
BTS06W
Launched
-
PIH-510CPM
Launched
-
PIH-5208HBW
Launched
-
PIH-5208LBW
Launched
-
PIH-520HBW
Launched
-
PIH-520LBW
Launched
-
PIH-520LW
Launched
-
PIH-76WM
Launched
-
PIH-76WMW
Launched
-
PIH-CPM
Launched
-
PIH-Z6W
Launched