| Model |
PS3105C |
| Protocols |
CSMA/CD |
| IEEE Standard |
IEEE 802.3 10Base-T Ethernet |
| IEEE Standard |
IEEE 802.3u 100Base-TX Fast Ethernet |
| IEEE Standard |
IEEE 802.3ab 1000Base-T Gigabit Ethernet |
| IEEE Standard |
IEEE 802.3z 1000Base-X Gigabit Ethernet |
| IEEE Standard |
IEEE802.3x Flow Control and Back Pressure |
| IEEE Standard |
IEEE802.3af for POE,IEEE802.3at for POE+ |
| Network connector |
8xRJ-45 10/100BaseT(X) auto negotiation, 8 Giga POE+ 802.3at/af PSE port, |
| Network connector |
2 x 1000M TX/SFP / Auto MDI/MDI-X function, Full/Half duplex |
| Housing design |
Rugged Aluminum, IP30 Protection |
| Network Cable |
UTP/STP above Cat.5e Cable |
| Network Cable |
EIA/TIA-568 10-ohm (100m) |
| Switch Architecture |
Back-plane (Switching Fabric): 21Gbps |
| Packet Buffer Size |
2M |
| Data Processing |
Store and Forward |
| LEDs |
PW1(Power 1) Green, PW2(Power 2) Green, PW3(Power 3) Amber for Power DIN, RLY (Alarm Relay) Amber, T9 ( SFP) Green/Link, Flash/active, T10 (SFP) Green/Link, Flash/active |
| LEDs |
TX/RJ-45 port: Green - LNK (Link/Active), Amber - POE, Fiber port, T9 ( SFP) Green/Link, Flash/active, T10 (SFP) Green/Link, Flash/active |
| LEDs |
POE, Green POE detected |
| POE power |
Input Voltage 48VDC-56VDC |
| POE power |
POE power per port 30watts. Maximum 36Watts with 56VDC input |
| POE power |
Maximum total power 240Watts with 56VDC input |
| Reserve polarity protection & Overload current protection |
Present |
| Removable terminal block |
Provide 2 Redundant powers , Alarm relay contact ,6 Pin. And circular POWER DIN for power adapter |
| Removable terminal block |
Wire range: 0.34mm^2 to 2.5mm^2 |
| Removable terminal block |
Solid wire (AWG):12-24/14-22 |
| Removable terminal block |
Stranded wire(AWG): 12-24/14-22 |
| Removable terminal block |
Torque:5lb-In/0.5Nm/0.56Nm |
| Removable terminal block |
Wire Strip length: 7-8mm |
| MTBF (mean time between failure) |
510,400 hrs ( MIL-HDBK-217F) at 25°C |
| EN55022/24 (Certifications) |
ITE equipment |
| EN55011 (Certifications) |
Industrial, Scientific and Medical (ISM) equipmen |
| Safety (Certifications) |
IEC EN60950-1 |
| EMC/EMS (Certifications) |
CE, FCC, VCCI |
| (Certifications) EMI |
FCC Part 15 Subpart B Class A, CE EN 55022 Class A |
| EN 50155 / EN 60068-2-6 (Certifications) |
Vibration |
| EN 50155 /EN 60068-2-27 (Certifications) |
Shock |
| EN 50155 / EN 60068-2-32 (Certifications) |
Free Fall |
| Alarm Relay Contact |
Relay outputs with current carrying capacity of 1 A @24VDC, for PW1 and PW2 |
| Alarm Relay Contact |
Relay in open circuit mode when 2 powers are connected. In short circuit mode when only one power supply is connected |
| Operating humidity |
5% to 95% (Non-condensing) |
| Operating temperature |
-40℃〜75℃ fully tested |
| Storage temperature |
-40℃〜85℃ |
| Dimensions |
155mmx48mmx120mm |
| Power Supply |
PW1 and PW2 for Redundant Dual DC 48V-56V 。PW3 for Power DIN to connect external power adapter DC 48-56V。For Switch only --- Power input range DC 12-56VDC。For POE --- Power input range 44-56VDC |
| MAC address table size |
8K |
| Installation |
DIN Rail mounting and Wall Mounting |
