Home / Products / Network Appliance / Industrial Power Supply / 120W Constant Voltage + Constant Current LED Driver

Download Photos

120W Constant Voltage + Constant Current LED Driver

Model：HLG-120H-54

Launched

Constant voltage + constant current mode output
Metal housing
Built-in active PFC function
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer; 3 in 1 dimming

The HLG-120H-54 is a single output switching power supply delivering 54V at 2.3A, rated 124.2W and exceeding the HLG-80H-48's 81.6W and 1.7A in both power and current. Input spans 90 to 305 VAC or 127 to 431 VDC at 47 to 63 Hz, efficiency is 93.5%, power factor 0.98 at 115VAC, ripple noise 200 mVp-p and voltage tolerance ±1.0%. Overcurrent and short circuit protections recover automatically, over voltage shuts down and recovers after power restoration. Operating temperature is -40°C to +80°C with 3.75 kVAC output isolation.

Specifications

DC voltage	54V
Rated current	2.3A
Rated power	124.2W
Voltage range	90〜305VAC or 127〜431VDC
Over current	95〜108%
Over current	Constant current limiting, recovers automatically after fault condition is removed
Frequency range	47〜63Hz
Short circuit	Constant current limiting, recovers automatically after fault condition is removed
Over voltage	59〜65V
Over voltage	Shut down o/p voltage with auto-recovery or re-power on to recovery
EMC emission	Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (@ load≧50%) ; EN61000-3-3
EMC immunity	Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge immunity Line-Earth 4KV, Line-Line 2KV)
Packing	1.12Kg; 12pcs/14.4Kg/0.8CUFT
MTBF (mean time between failure)	192.2K hrs min. MIL-HDBK-217F (25℃)
Constant current region	27〜54V
Ripple & noise (max.)	200mVp-p
Voltage ADJ. range	Adjustable for A-Type only (via built-in potentiometer)。49〜58V
Current ADJ. range	Adjustable for A-Type only (via built-in potentiometer)。1.1〜2.3A
Voltage tolerance	±1.0%
Line regulation	±0.5%
Load regulation	±0.5%
Setup, rise time	1200ms,50ms/115VAC 500ms,50ms/230VAC
Hold up time	12ms / 115VAC, 230VAC
Power factor	PF≧0.98/115VAC, PF≧0.95/230VAC, PF≧0.93/277VAC @ full load
Total harmonic distortion	THD< 20% (@ load≧50% / 115VAC,230VAC; @ load≧ 75% / 277VAC)
Efficiency	93.5%
AC current	1.4A / 115VAC 0.6A / 230VAC 0.55A / 277VAC
Inrush current	COLD START 60A(twidth=375 s measured at 50% Ipeak) at 230VAC; Per NEMA 410
Max. No. of PSUs on 16A circuit breaker	5 units (circuit breaker of type B) / 9 units (circuit breaker of type C) at 230VAC
Leakage current	<0.75mA / 277VAC
Temp. coefficient	±0.03%/℃(0〜60℃)
Vibration	10〜500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
Safety standards	UL8750(type”HL”), CSA C22.2 No. 250.0-08, ENEC, TUV EN61347-1, EN61347-2-13 independent; IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1
Withstand voltage	I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:1.5KVAC
Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
Operating humidity	20〜95% RH non-condensing
Operating temperature	-40〜+80℃
Storage Humidity	10〜95% RH
Storage temperature	-40〜+80℃
Dimensions	2206838.8mm (LWH)

Downloads

Classification	Description	Date	File Size	Downloads
Catalogue > Others	HLG-120H-54 Catalogue- HLG-120H-54	2016-12-07	388KB	English 繁體中文

Frontend & Cameras

Backend & Systems

Lens, Brackets and Others

By Industry

By Technology

Software & Documents

120W Constant Voltage + Constant Current LED Driver